Baking Resources
Home › Guides

How Much Fudge or Peppermint Bark Fits in a Gift Tin? Pan Size to Pounds

Updated November 2026 · Baking Resources

How Much Fudge or Peppermint Bark Fits in a Gift Tin? Pan Size to Pounds

A typical 8x8 pan of fudge weighs about 2 pounds and cuts into 64 one-inch squares, enough for four half-pound gift tins, while a 9x13 pan holds about 1.8 times as much, so a doubled recipe gives roughly 4 pounds, or eight half-pound tins. Peppermint bark is lighter per pan: a 9x13 makes about 1 3/4 pounds, and a half sheet makes about twice that.

To move a recipe from one pan to another, use the free cake pan converter. Pick the pan your recipe calls for and the pan you own, and it tells you how many times the recipe to make so your fudge comes out the same thickness. Then the tables below turn pans into pounds, pieces and tins.

Most candy makers get the recipe right and the count wrong. They make one pan, start filling tins, and realize at tin number five that they're out. Or they double a recipe into a pan that's too small and end up with fudge so thick it won't cut cleanly. Here's how to plan both sides: how much each pan makes, and how much each tin needs.

🍬 How much candy per pan and tin? Tap one:
Pick one 👇
Compare your two pans with the free cake pan converter →

The Short Answer: Pans, Pounds and Tins

Start with this table. It assumes fudge about 3/4 inch thick, bark about 1/3 inch thick, and a half-pound gift per tin.

Pan Fudge yield 1-inch fudge squares Bark yield Half-pound tins filled
8 x 4 1/2 loaf (half batch) About 1 pound About 32 Not typical 2
8 x 8 square About 2 pounds 64 About 1 pound 4 (fudge) or 2 (bark)
9 x 9 square About 2 1/2 pounds 81 About 1 1/4 pounds 5 (fudge)
11 x 7 rectangle About 2 1/2 pounds 77 About 1 1/4 pounds 5 (fudge)
9 x 13 rectangle or quarter sheet About 3 3/4 to 4 pounds 117 About 1 3/4 pounds 7 to 8 (fudge) or 3 (bark)
10 x 15 jelly roll Too shallow for fudge Not typical About 2 1/4 pounds 4 (bark)
13 x 18 half sheet Too shallow for fudge Not typical About 3 1/2 pounds 7 (bark)

These are working numbers, not lab results. Your fudge may be a little thicker or thinner, and different chocolates weigh slightly differently. But they're close enough to plan a shopping list and a gifting schedule, and the math behind them is laid out below so you can adjust for your own recipe.

Where the 2-pound figure comes from

A common easy fudge for an 8x8 pan uses 3 cups of chocolate chips (about 18 ounces), one 14-ounce can of sweetened condensed milk, a couple of tablespoons of butter and a splash of vanilla. Add those weights together and you get about 33 ounces, which is just over 2 pounds. Spread in an 8x8 pan, that's a layer roughly 3/4 inch thick.

Cut into 8 rows by 8 rows, you get 64 one-inch squares. Divide 33 ounces by 64 and each square weighs about 1/2 ounce. That's the most useful number in this whole guide: a one-inch square of fudge weighs about half an ounce, so 32 squares make a pound.

Classic cooked fudge made with sugar, milk or cream, butter and chocolate lands in a similar range for an 8x8 pan. If your recipe is different, add up the weights of the main ingredients and you'll know your yield before you start.

How Pan Size Changes Fudge Yield

When you change pans, the number that matters for fudge and bark is the floor area of the pan. Fudge and bark aren't like cake. They don't rise, so you aren't worried about the pan overflowing. You're trying to keep the same thickness, so the candy sets properly and cuts into the same size pieces.

Here's how the common pans compare. The floor areas are simple length times width for square and rectangular pans.

Pan Floor area Compared with an 8x8 Recipe to make for the same thickness
8 x 8 square 64 square inches 1x 1 batch
8 1/2 x 4 1/2 loaf About 38 square inches About 0.6x 1/2 batch for slightly thinner fudge, 2/3 for the same
11 x 7 rectangle 77 square inches 1.2x 1 1/4 batches
9 x 9 square 81 square inches 1.27x 1 1/4 batches
10 x 10 square 100 square inches 1.56x 1 1/2 batches
9 x 13 rectangle 117 square inches 1.83x 1 3/4 to 2 batches
10 x 15 jelly roll 150 square inches 2.34x Too shallow for most fudge
13 x 18 half sheet 234 square inches 3.66x Too shallow for most fudge

If you have a square pan you're not sure about, our guide to square cake pan sizes shows how to measure it. Measure across the top inside edges, not the outside, and not the bottom, since many pans have sloped sides.

What happens if you don't scale

Pour one 8x8 batch into a 9x13 and the fudge spreads to a little under half an inch thick. It sets, but it's thin and fragile, the squares look skimpy in a tin, and you'll get pieces that weigh closer to 1/4 ounce. Cram a double batch into an 8x8 and you get fudge about 1 1/2 inches thick. It takes much longer to set, it's hard to cut neatly, and each one-inch square is a dense one-ounce block that's more than most people want in one bite.

The double-batch shortcut for a 9x13

The exact ratio from an 8x8 to a 9x13 is about 1.8, which the converter rounds to 1 3/4 times the recipe. But most easy fudge recipes are built around one can of sweetened condensed milk, and three quarters of a can is awkward to measure and leaves you with leftovers.

The practical answer: make a full double batch for a 9x13. Two cans of condensed milk and 6 cups of chips spread over 117 square inches make fudge about 10 percent thicker than the 8x8 version. That's a difference you won't notice in a tin, and you skip the fiddly measuring. The yield comes out at about 4 pounds and 117 one-inch squares, each a touch over half an ounce.

If you'd rather match the thickness exactly, scale to 1 3/4 times. Paste the ingredient list into the recipe converter, and it handles the cans for you: it keeps the can size as written and changes only the count, with a note telling you to round sensibly when you land on a fraction of a can.

How to Do It with the Free Tool

The cake pan converter measures pans by how many cups they hold, which works well for fudge because both an 8x8 and a 9x13 are about 2 inches deep. Here's the exact walkthrough for the most common candy swap.

Scaling 8x8 fudge to a 9x13

  1. Pick the recipe's pan. In the first menu, "The recipe calls for," choose 8 x 8 square, 2 in deep. The tool shows that it holds 8 cups.
  2. Pick your pan. In the second menu, "You actually own," choose 9 x 13 rectangle, 2 in deep. It holds about 14 1/2 cups.
  3. Set the fill level. Under "How full does the recipe fill its pan?" tap Thin layer about 40%. Fudge about 3/4 inch deep in a 2-inch pan is in that range, so the depth picture comes closer to what you'll really see.
  4. Read the result. The big number shows 181%, and the tool says to use 1 3/4 times the recipe, exactly 1.813 times. That matches the floor-area math above.
  5. Decide 1 3/4 or 2. Round to 2 for one-can recipes, as explained above, or stay at 1 3/4 if your recipe has no cans or you're weighing everything.

Want to go the other way, from a 9x13 recipe down to an 8x8? Press the Swap the two pans button between the menus. The result flips to about 55 percent, and the tool tells you how much of the recipe to make, which works out to a little over half.

Other fudge swaps worth checking

Run these through the same two menus to see the factor before you shop:

The tool also includes a pan capacity chart further down its page, listing each pan's volume in cups and its floor area in square inches. That floor area column is the one to use for bark, which comes next.

Cutting clean, even squares

Your piece count only holds up if the squares are even, so it's worth a few minutes of care at the cutting board.

If you trim a thin strip off the edges for neater squares, expect to lose about one row and one column. An 8x8 then gives about 49 squares instead of 64, so count trimming into your buffer if you like a crisp edge.

Peppermint Bark: Pounds per Pan

Bark is a thin sheet of candy, usually a layer of dark or semisweet chocolate topped with a layer of white chocolate and crushed candy canes. Because it's thin, it's made on rimmed baking sheets more often than in deep pans, and that changes how you scale it.

A common bark recipe for a 9x13 uses:

That's about 27 ounces in total, or close to 1 3/4 pounds. Spread over the 117 square inches of a 9x13, it ends up about 1/3 inch thick, which is right where bark snaps cleanly without shattering into crumbs.

If you're new to working with chocolate, our guide on how to melt chocolate covers the gentle heat that keeps white chocolate from seizing, which is the most common bark failure.

Bark yield by pan

Pan Floor area Chocolate (dark plus white) Candy canes Approximate yield Pieces, about 2 inches
8 x 8 square 64 square inches About 13 ounces About 1/4 cup About 1 pound 14 to 16
9 x 13 or quarter sheet 117 square inches 24 ounces About 1/2 cup About 1 3/4 pounds 24 to 30
10 x 15 jelly roll 150 square inches About 31 ounces About 2/3 cup About 2 1/4 pounds 32 to 38
13 x 18 half sheet 234 square inches 48 ounces About 1 cup About 3 1/2 pounds 50 to 60

Bark pieces are irregular by nature, so the piece counts are rough. If you want neat, even pieces for tins, score the bark with a sharp knife when it's set but not fully hard, then snap it along the lines once it's firm. Scored 2-inch squares come out close to 1 ounce each.

Using the converter for bark

Here's where you need to be a little careful. The cake pan converter works in cups of volume, and it lists sheet pans as 1 inch deep while the square and rectangle cake pans are 2 inches deep. For a thin candy that never fills the pan, depth doesn't matter. Only the floor does.

So for bark, follow one of these two approaches:

  1. Compare like with like. If you're going from a 9x13 to a half sheet, choose Quarter sheet 9 x 13, 1 in deep in the first menu and Half sheet 13 x 18, 1 in deep in the second. Both are 1 inch deep, so the result, 200%, is a true floor comparison. Double the bark recipe.
  2. Use the floor area column. Scroll to the tool's pan capacity chart and divide the floor area of your pan by the floor area of the recipe's pan. An 8x8 (64 square inches) going to a 9x13 (117 square inches) is 117 / 64 = 1.83, the same factor as fudge.

What doesn't work for bark is comparing an 8x8 cake pan with a quarter sheet. The tool sees two pans that both hold 8 cups and calls it a straight swap, which is true for cake batter but not for a thin layer of chocolate. The quarter sheet has nearly twice the floor.

Bark in a 9x13 cake pan vs a quarter sheet

A 9x13 cake pan and a quarter sheet pan have the same floor, about 117 square inches, so the bark recipe is identical for both. The cake pan's tall sides make it a little harder to lift the bark out, so line it with parchment or foil with some overhang on the long sides, and use the overhang as handles.

How Much Candy Fits in a Gift Tin

Now the other half of the question: how much does each tin hold? This depends on the tin, how you pack it, and whether you use paper candy cups. There's no industry standard size for gift tins, so the most reliable method is a quick dry run.

Do a dry run before you cook

Before you make the candy, take one empty tin and fill it with something the same size as your pieces. Cut a sheet of thin cardboard into one-inch squares, or use dice, or just set out paper candy cups. Count how many fit in one layer, then decide how many layers fit under the lid with parchment in between. That count, times half an ounce per one-inch square of fudge, is what your tin holds.

Leave a little headroom. A lid pressed down on candy crushes the top layer, and white chocolate scuffs easily.

Planning numbers for round tins

These figures assume tins about 2 1/2 to 3 inches deep, one-inch fudge squares in paper candy cups (each cup takes up about 1 1/2 inches across), and two layers with parchment between them.

Tin size (across the top) Fudge pieces per layer Fudge pieces, 2 layers Fudge weight Bark instead (scored 2-inch pieces)
About 4 inches 5 10 About 5 ounces 3 or 4 pieces, about 1/4 pound
About 5 inches 8 16 About 1/2 pound 5 or 6 pieces, about 1/3 pound
About 6 inches 12 24 About 3/4 pound 8 pieces, about 1/2 pound
About 7 inches 16 32 About 1 pound 10 to 12 pieces, about 2/3 pound
About 8 inches 21 42 About 1 1/4 pounds 14 to 16 pieces, about 1 pound

Without candy cups, squares packed side by side on parchment fit more, often half again as many. They also stick together if the room is warm, so cups are worth it for fudge that travels.

Bark weighs less per tin than fudge because shards don't pack tightly. Stand bark pieces on their edges, like files in a drawer, and you can fit noticeably more than stacking them flat.

What counts as a generous gift?

There's no rule, but a few loose guidelines help you plan:

Mixing candies makes a tin look fuller and more festive than a single kind. Fudge and bark pair well, and a few pieces of toffee add crunch. If you need an easy third candy, saltine toffee bakes on a sheet pan in about the same time it takes the bark to set.

A Worked Example: 12 Tins of Fudge and Bark

Here's a full plan for 12 gift tins, each about 6 inches across, holding 12 squares of fudge and about 4 ounces of bark.

Step 1: Count what goes in the tins

Step 2: Add a buffer

Add 10 percent for broken pieces, a crooked cut and a few taste tests.

Step 3: Choose the pans

Candy Pans Yield Covers
Fudge One 9x13 (double batch) 117 squares Most of the 158
Fudge One 8x8 (single batch) 64 squares The rest, with about 23 spare
Bark One 13x18 half sheet (double recipe) About 3 1/2 pounds All 3.3 pounds
Bark (no half sheet) Two 9x13 pans or quarter sheets About 3 1/2 pounds All 3.3 pounds

So the shopping list is three batches of fudge (two for the 9x13 and one for the 8x8) and two batches of bark.

Step 4: Scale the ingredients

Three batches of the easy fudge from earlier:

Ingredient 1 batch (8x8) 3 batches (one 9x13 plus one 8x8)
Semisweet chocolate chips 3 cups (about 18 ounces) 9 cups (about 54 ounces)
Sweetened condensed milk 1 can (14 ounces) 3 cans (14 ounces each)
Butter 2 tablespoons 6 tablespoons
Vanilla extract 1 teaspoon 1 tablespoon
Salt A pinch A few pinches

Make the double batch and the single batch separately rather than melting nine cups of chips in one pot. A big pot of chocolate heats unevenly and can scorch on the bottom before the top melts.

Two batches of bark:

Ingredient 1 batch (9x13) 2 batches (half sheet)
Semisweet or dark chocolate 12 ounces 24 ounces
White chocolate 12 ounces 24 ounces
Peppermint extract About 1/2 teaspoon About 1 teaspoon
Crushed candy canes About 1/2 cup About 1 cup

Step 5: Pack it up

Cut the fudge into one-inch squares, set each in a paper candy cup, and lay 6 in the bottom of each tin. Add a sheet of parchment, 6 more squares, then stand 3 or 4 pieces of bark along the side or lay them on top. Spares go into a container for the household, or into a 13th tin for someone you forgot.

Quick plans for other tin counts

If you're not making 12, use this table as a shortcut. It assumes each tin holds about 1/2 pound in total, split roughly 6 ounces of fudge (12 squares) and 2 ounces of bark (2 or 3 small pieces), plus a 10 percent buffer.

Tins Fudge squares needed Fudge pans Bark needed Bark pans
4 53 One 8x8 About 9 ounces One 8x8
6 80 One 9x9, or one 8x8 plus a half batch in a loaf pan About 13 ounces One 8x8
8 106 One 9x13 (double batch) About 18 ounces One 9x13
12 158 One 9x13 plus one 8x8 About 1 3/4 pounds One 9x13
20 264 Two 9x13 pans plus one 8x8 About 2 3/4 pounds One half sheet
30 396 Three 9x13 pans plus one 8x8 About 4 1/4 pounds One half sheet plus one 9x13

For larger counts, it's usually easier to make several 9x13 pans than to hunt for a bigger pan. Fudge in anything shallower than about an inch, such as a jelly roll pan or a half sheet, ends up too thin to cut into neat squares.

Making Fudge and Bark Ahead for Gifting

Candy is one of the best holiday gifts to make ahead, because it keeps far better than most baked goods. Here's a sensible timeline for tins you'll hand out in mid to late December.

When Task
2 to 3 weeks before Buy tins, candy cups, parchment and ingredients; do your tin dry run
1 to 2 weeks before Make the bark, which keeps well in a cool, dry spot
3 to 7 days before Make the fudge
1 to 2 days before Cut fudge, pack tins, add labels or tags
Gift day Hand out tins and keep them away from heat vents and sunny car seats

How long fudge and bark keep

Most chocolate fudge keeps about one to two weeks at cool room temperature when it's wrapped airtight, and longer in the fridge. Peppermint bark keeps a couple of weeks in a cool, dry place in an airtight container. Recipes vary, so check what yours says and lean toward the shorter end if you're unsure.

Heat and humidity are the two enemies. Bark left in a warm room can soften and lose its snap, and the crushed candy canes on top pull moisture from the air and turn sticky. Fudge left uncovered dries out at the edges. Keep both well wrapped until you pack the tins, and tuck a note in each tin suggesting it be kept somewhere cool.

Should you refrigerate candy before packing?

Chilling helps fudge set firm enough to cut cleanly, so a few hours in the fridge before cutting is a good idea. Once it's cut and packed, cool room temperature is usually fine for the short time a gift tin sits before it's eaten. If you do store bark in the fridge, let the container come to room temperature before you open it, so condensation doesn't form on the chocolate and leave a dull, streaky film.

Shipping tins

If some tins are going by mail, fudge travels better than bark, which can break into small shards in a bumpy box. Pack the candy snugly so nothing slides, put the tin in a box with padding all around it, and avoid shipping chocolate to warm places if you can. For holiday cutoff dates, check your carrier's official holiday shipping schedule and send early rather than counting on the last day.

Scaling cooked fudge safely

Everything above works smoothly for no-cook fudge made with condensed milk and melted chocolate. Classic cooked fudge, the kind you boil to the soft-ball stage and beat as it cools, is a different story.

Why cooked fudge doesn't like to be doubled

Cooked fudge relies on reaching a precise temperature, usually somewhere around 234 to 237 degrees F, the soft-ball range. When you double the batch in the same pot, the syrup is deeper. It takes much longer to reach temperature, it's harder to get an accurate reading, and the bottom can scorch while you wait. Beating a double batch by hand as it cools is also hard work, and if you stop too early or too late, the texture suffers.

The reliable approach is to make two separate batches rather than one doubled batch. Cook one, pour it into its pan, wash the pot, and cook the second. Use an 8x8 for each, or pour both into the same 9x13 as long as you work fast enough that the first batch hasn't fully set.

Our candy temperature chart lists the soft-ball range and the other sugar stages, along with how to check your thermometer in boiling water before you start.

What still scales well

The pan math is the same for cooked fudge. A 9x13 still needs about 1.8 times the 8x8 recipe, and the cake pan converter still gives you the right factor. It's only the cooking that you split into batches. Bark scales easily at any size, because you're only melting chocolate, not cooking sugar to a temperature.

Troubleshooting Fudge and Bark for Gift Tins

Here's what tends to go wrong when you scale candy for a crowd, and how to fix it.

Problem Likely cause What to do
Fudge too thin, squares look skimpy Recipe not scaled up for a bigger pan Scale with the pan factor next time; for now, cut 1 1/4-inch squares so each piece looks fuller
Fudge too thick to cut neatly Doubled recipe in a pan that's too small Cut smaller pieces, about 3/4 inch, or let it warm slightly so the knife glides
Fudge grainy Cooked fudge stirred while boiling, or beaten while too hot Next time, stop stirring once it boils and let it cool before beating
Fudge won't set Cooked fudge didn't reach soft-ball temperature Check your thermometer; some cooks rewarm with a splash of milk and cook again to temperature
Bark layers separate Bottom layer fully hard before the white layer went on Add the white layer when the dark layer is set but still slightly tacky
Bark shatters into crumbs Spread too thin, or cut when fully cold and brittle Keep it around 1/3 inch; score while firm but not rock hard
Candy canes sticky or weeping Moisture from the air or the fridge Store airtight, add the candy canes right before the chocolate sets, and avoid humid spots
Not enough pieces for all the tins No buffer, or a heavy hand with tasting Add 10 percent next time; fill the gap with a quick extra pan of bark
White chocolate thick and clumpy Overheated or a drop of water got in Melt gently in short bursts, and keep spoons and bowls completely dry

Plan Your Candy Tins in Three Steps

  1. Decide what goes in each tin. About 1/2 pound per tin is a good default, such as 12 fudge squares plus a few pieces of bark.
  2. Multiply and add 10 percent. Tins times pieces per tin, plus a buffer, tells you how many squares and how many pounds of bark to make.
  3. Match the pans. An 8x8 gives about 64 squares or 2 pounds of fudge, a 9x13 gives about 117 squares or 4 pounds, and a 9x13 of bark gives about 1 3/4 pounds.

When the pan in your recipe isn't the pan in your cupboard, open the free cake pan converter, pick both pans, and let it tell you how many times the recipe to make before you start melting chocolate.

Frequently Asked Questions

How much fudge does an 8x8 pan make?

A typical 8x8 pan of fudge made with 3 cups of chocolate chips and one can of sweetened condensed milk weighs about 2 pounds. It cuts into 64 one-inch squares of about half an ounce each, or 36 larger squares of a bit under an ounce each.

How do I convert an 8x8 fudge recipe to a 9x13 pan?

A 9x13 pan has about 1.8 times the floor area of an 8x8, so you need about 1 3/4 times the recipe for the same thickness. For recipes built around one can of condensed milk, a full double batch is easier and only makes the fudge about 10 percent thicker.

How much fudge should I put in a gift tin?

About 1/2 pound is a generous gift for a neighbor or coworker, which is roughly 16 one-inch squares. A 5-inch tin holds about that much in two layers with candy cups, while a 6-inch tin holds closer to 3/4 pound.

How much peppermint bark does a 9x13 pan make?

A bark recipe with 12 ounces of dark chocolate, 12 ounces of white chocolate and about 1/2 cup of crushed candy canes makes about 1 3/4 pounds in a 9x13. That breaks into roughly 24 to 30 pieces about 2 inches across.

Can I make peppermint bark on a half sheet pan?

Yes. A 13x18 half sheet has twice the floor area of a 9x13 or quarter sheet, so double the bark recipe to keep the same thickness. That gives about 3 1/2 pounds, enough for about seven half-pound tins of bark alone.

Can I double a cooked fudge recipe?

It's safer to make two separate batches. A doubled batch takes much longer to reach soft-ball temperature, can scorch, and is harder to beat by hand. Pan scaling still applies, so you can pour both batches into a 9x13 if you work quickly.

How far ahead can I make fudge for gifts?

Most chocolate fudge keeps about one to two weeks at cool room temperature when it's wrapped airtight, so making it three to seven days before gifting works well. Check your recipe's storage notes, and keep the tins away from heat.

Why does the pan converter say an 8x8 and a quarter sheet are a straight swap?

The converter compares how many cups each pan holds, and both hold about 8 cups because the quarter sheet is only 1 inch deep. For thin candy like bark, the floor area matters instead, and a quarter sheet has nearly twice the floor of an 8x8. Compare two sheet pans with each other, or use the floor area column in the tool's chart.

More guides

See all